A bamboo cutting board is stronger, more durable, and more hygienic than a wooden cutting board. They also look great and are a more sustainable material than wood. However, require special care and maintenance in order to prevent them from being damaged. You will need to wash your bamboo cutting board quickly and carefully so that it does not warp or crack.
If your bamboo cutting board gets stained or starts to smell, there are easy, natural ways to restore it. To keep your bamboo cutting board in prime condition, you will also need to coat it in mineral oil occasionally. The followings are tips for cleaning and maintaining bamboo cutting boards.
(1) Wash the cutting board in warm water and soap quickly. Wash your bamboo cutting board immediately after use, and do not wash it for more than a few minutes. You should also prevent hot water from coming into contact with bamboo because it can damage it.
(2) Do not use an abrasive material to scrub your bamboo cutting board. Rub the board with your hands or a soft cloth if you need to remove larger pieces of food.
(3) Avoid soaking your cutting board in the water. Bamboo is sensitive to heat and moisture, especially over prolonged periods. Do not put your bamboo cutting board in the dishwasher or let it soak in the sink, or it will warp and develop cracks.
(4) Rinse your bamboo cutting board with lukewarm water. Make sure to get all of the soap and food residues off of the cutting board by holding it under the running water. Even though the water is not hot, you want to limit the cutting board’s exposure to water, so rinse as quickly as you can.
(5) Dry your bamboo cutting board immediately. As soon as your board is rinsed, dry it off with a soft towel. After you have dried it with a towel, stand it up vertically and allow it to air dry.
Removing Stains and Odors
(1) Sprinkle coarse sea salt on the surface of the cutting board. Ideally, you should do this immediately after you have washed and rinsed your cutting board, but before it has been dried. Apply extra salt to any stained areas. The salt will act as an abrasive material for scrubbing and it will soak up excess moisture. If you are dealing with a particularly stubborn stain, apply some baking soda instead.
(2) Scrub the board with a halved lemon. Lemon juice will kill bacteria and remove odors from the bamboo. Hold the citrus side of the lemon against the board. Press it into the salt and move it back and forth in a scrubbing motion until the salt has disappeared. Make sure you also scrub the corners and edges of your bamboo cutting board.
(3) Cover the surface of your cutting board with another layer of salt. Spread the salt out evenly. Your cutting board should still be somewhat wet from the lemon juice when you apply this second layer of salt. Do not dry the lemon juice off of your cutting board.
(4) Leave the salt on the cutting board overnight. If you cannot leave it out over an entire night, you should let the salt stay on the board for at least 2 hours. The lemon juice needs time to penetrate the wood, and the salt will then soak up the excess moisture.
(5) Remove the salt from the bamboo cutting board. Use the back of a spatula to scrape off the salt. Take a damp clean cloth and wipe off any remaining residue.
You can reuse this salt until it is no longer white. Just scrape it into a container and store it.
Performing Regular Maintenance
(1) Heat up some mineral oil until it is warm. Pour the mineral oil into a small pan and heat it on the stove until it is warm to the touch. You do not want it to be hot, just warm enough so that the oil soaks into the bamboo. Only use food-grade mineral oil on your bamboo cutting board.
(2) Drizzle the warm oil onto all surfaces of the cutting board. Only do one of the large flat sides at a time so that the oil will spread more evenly. Don’t forget to oil the corners and edges.
The oil will create a protective barrier that keeps enough moisture in the board to prevent cracking from dryness but keeps enough water out to prevent warping.
(3) Work in the oil using a soft cloth. Spread the oil around the board using the cloth to get an even coat. Rub with the grain if your bamboo cutting board’s grain has a uniform direction.
Once the oil has soaked into one side of the board, repeat the process with the other side and the edges.
(4) Let the oil soak into the bamboo for at least 1 hour. If you are able, you may let the oil soak into the bamboo overnight. Position the board upright on one of its edges while you let the oil soak in.
Make sure that you set the oil-soaked board on a surface that will not be damaged by oil stains. Putting it on a plate or an air-dry dish rack would be ideal.
(5) Store the cutting board in a cool, dry place. Prolonged exposure to heat, moisture, and even direct sunlight can cause damage to a bamboo cutting board. Try not to store it with objects that might scratch it like sharp knives and metal utensils.
You should only need to oil your cutting board 1 or 2 times a month. Some people prefer to treat their cutting boards with oil after every use. This can be time-consuming, but it does offer more protection for your cutting board.
Bamboo cutting boards designed and produced by Bamboomake are made of high-quality materials, which are easy to clean and maintain, and can meet the actual needs of users. If you have any requirements for this after reading the above, you can contact us to obtain related customized services.
We are a professional manufacturer of high-quality bamboo tableware, which can bring customers a better experience in product design and service. We have an experienced production team and a strict quality inspection system, which can fully control the quality of our products. We always insist on providing customers with good kitchen health solutions. If you are interested in our bamboo cutting boards, please do not hesitate to contact us immediately!